Tuesday, September 19, 2017

White Papers and Case Studies


“From Sedan to Sportster” – How to Boost the Performance of...

Author: Mark Gimson, Singer Valve Pressure Management has become a very useful tool around the world for controlling leakage in piping networks. This has primarily...

Valves Won’t Open? Valves Won’t Close? Use this Valve Troubleshooting Guide.

Having valve trouble? Are you at work panicking? Are you thinking any of these thoughts? My relief valve isn’t opening! My relief valve will...

A Guide To Eliminating Pipe Breaks

Pipe bursts as a result of transients and surges within a piping network are very common problems throughout the world. Not only are the...

Choosing a High Temperature Steam Resistant Elastomer

The materials used to create seals must withstand, both physically and chemically, the extreme conditions in which they are increasingly being utilized. There are...

Low Temperature Sealing in High Pressure Applications

There are many choices in elastomer materials based on criteria such as chemical and heat resistance. Often the low temperature performance of an elastomer...

Investigating the Explosive Decompression Resistance of a Low Temperature Perfluoroelastomer

Rapid Gas Decompression (RGD) or Explosive Decompression (ED) is a failure mode which can occur in elastomer materials following exposure to high pressure gaseous...

Low Temperature Sealing with Elastomers in Sour Gas

Low temperature sealing with elastomers is critical in both arctic regions and subsea valves. Additionally sour gas or hydrogen sulfide is increasingly being found...

CRAFT Tech – CFD Analyses for Valves

CFD analyses are playing an increasingly important role in identifying and characterizing unsteady flow dynamics that impact valve performance as well as predicting steady performance. Unsteady...

Predictive Maintenance Using Today’s Technology

Implementing a PDM program can be tough, In today’s manufacturing world. Despite the proven success of many programs many companies that have been operating the same...

Elastomer Failure Modes – PPE

This paper highlights the main Elastomer Failure Modes and suggested corrective actions.  •Compression Set •Pressure Extrusion •Rapid Gas Decompression •Thermal Extrusion/Thermal Expansion •Thermal Degradation •Low...

STAY CONNECTED

68FollowersFollow
0FollowersFollow
15FollowersFollow
1,797FollowersFollow
0SubscribersSubscribe